News

About Us

Engleberger Award
Recipient of the
Joseph F. Engelberger
Award for Technology
July 25, 2018: Trade Show
Along with our Chinese distributor, Worldwide Technologies, we displayed our products at the China International Robot Show (CIROS) in Shanghai, China. Click here to read the news release.
 
July 2, 2018: China International Robot Show 2018
Dynalog will participate in the China International Robot Show (CIROS) 2018, which takes place from July 4th to July 7th, 2018, in Shanghai.  Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the AutoCal™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information: http://en.ciros.com.cn. We look forward to meeting with you at this event.
 
May 14, 2018: A Japanese Auto Maker Selects Dynalog's DynaCal System 
Dynalog's Dynacal system has been selected by a Japanese auto maker in the US for recovery of their robot programs after a crash, moved fixture, replacement of robot motors, and replacement of end-effector. A reference signature of the robot-cell is acquired with the DynaCal system when the robot-cell is performing its production job accurately. After a change in the robot-cell, e.g. tool crash, the DynaCal system is utilized to identify the difference in the robot-cell signature compared to the reference signature. The differences are updated in the robot controller, i.e. TCP, User Frame, and Zero-Position-Mastering are updated in the robot controller, which recovers the robot programs to its previous accurate state.
 
November 14, 2017: An American Aeronautic System Integrator Selects Dynalog's DynaCal System 
Dynalog's Dynacal system has been selected by an American aerospace system integrator to provide robot-cell Absolute Accuracy and to enable off-line programming for their robotic drilling cells installed in their Mexican plant. The integrator uses the DynaCal system to identify the Absolute Accuracy parameters of the robot-cell. Furthermore, with the identified robot-cell parameters, the DynaCal Filter Module compensates the robot positions created in a simulation environment to account for the differences between the simulation robot-cell and the actual robot-cell. The precision provided by the calibrated robot-cell meets the requirements of their robotic drilling process.
 
June 1, 2017: China International Robot Show 2017
Dynalog will participate in the China International Robot Show (CIROS) 2017, which takes place from July 5th to July 8th, 2017, in Shanghai.  Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the AutoCal™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information: https://en.ciros.com.cn. We look forward to meeting with you at this event.
 
May 11, 2017: Trade Show
Dynalog will participate in the trade show Metalloobrabotka 2017, which takes place from May 15th to May 19th, 2017, in Moscow.  Master-Service Metrology Group, Dynalog's distributor in Russia, will present Dynalog products: the DynaCal™ robot-cell calibration system, the AutoCal™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information: https://www.metobr-expo.ru/en/.Come visit us at booth #FF108. We look forward to meeting with you at this event.
 
March 01, 2017: A Global Automaker SelectsDynalog for Robotic Accuracy for their Laser Cutting Application
Dynalog is selected by a global automaker to provide Absolute Accuracy, Temperature Compensation, and Guidance for robots performing laser cutting process. A robot-mounted sensor is utilized to acquire the calibration and guidance measurements. A robot-mounted sensor reduces the number of sensors required to perform the robot guidance process. These laser cutting cells will soon go into full production.
 
Ceramic based calibration targets are mounted within the robot-cells. The measurements of the calibration targets are utilized by Dynalog's DynaFlex software to identify the Absolute Accuracy robot-cell parameters. Furthermore, periodic measurements of the calibration targets are obtained automatically (few measurements during transfer of the car), and used to identify the change in the robot-cell parameters. The critical robot laser cutting positions are compensated for the change in the robot-cell parameters. Moreover, during each production cycle a few car datum features are measured by the robot-mounted sensor. The accurate location of the car is identified based on these measurements.
 
November 09, 2016: Trade Show
Along with our Chinese distributor, Worldwide Technologies, we displayed our products at the CIFF Expo in Shanghai, China. Click here to read the news release.
 
October 18, 2016: Research Study of Absolute Accuracy of Robots Using Dynalog's CompuGauge System
Polytechnica University of Romania conducted a research study to determine the Absolute Accuracy of Industrial robots using the performance analysis module of Dynalog's CompuGauge system. The CompuGauge performance analysis module is based on ISO-9283 and ANSI RIA 15.05 standards. The results of the study is available at the following link: http://www.wseas.us/e-library/conferences/2013/Vouliagmeni/MRME/MRME-08.pdf.
 
October 5, 2016: Ford Selects AccuBeam System for Robot Temperature Compensation
Ford has selected Dynalog's AccuBeam robot temperature compensation system for many of its high precision robotic-based applications, e.g. laser cutting, form & pierce, etc., that are being installed in various plants around the world. The AccuBeam system automatically compensates for robot drift due to changes in ambient temperature, and due to self-heating, thus maintaining the robot's repeatability over-time. The AccuBeam system is a proven production ready in-line system that has been successfully compensating robots for more than10 years. The AccuBeam system includes the required automatic communication with the robot controller, the AccuBeam sensor, and other peripheral equipment. Click the following link to view the AccuBeam product data sheet: AccuBeam.
 
July 11, 2016: Trade Show
Along with our Chinese distributor, Worldwide Technologies, we displayed our products at the CIROS International Robot Show in Shanghai, China. Click here to read the news release.
 
May 5, 2016: Adaptive Control of Robot for Aerospace Drilling
Dynalog is chosen by an aerospace integrator to provide accuracy solution for two robots performing drilling and routing of their parts. The DynaGuide Adaptive Control system performs automatic in-line compensation of the robot's position based on measurements of the TCP from a Northern Digital photogrammetry system. The robot-cell contains two Fanuc robots on 20 meters long tracks. Two photogrammetry systems are used by the DynaGuide software to automatically monitor and correct the TCP(xyz & orientation) of both the robots. Dynalog's DynaCal system provides the initial robot-cell Absolute Accuracy required to reduce the number of corrective iterations performed by the DynaGuide Adaptive Control system. Furthermore, Dynalog's AutoCal system is also used to monitor and recover the robots TCP and zero-position-mastering for changes due to e.g. crash, change of motors, replacement of end-effector, etc. The achieved robotic drilling position accuracy is only limited by the accuracy of the measurement system and the resolution of the robot. Click the following links to view the product data sheets:DynaCal, DynaGuide, and AutoCal.
 
April 12, 2016: Absolute Accuracy for Robot Trimming
Dynalog is selected by a system integrator to provide robot-cell accuracy for a robotic trimming process for a helicopter manufacturer. A Kawasaki robot is utilized in this project to perfrom he trimming operation on helicopter doors, and other panes. The DynaCal system is utilized to identify the Absolute Accuracy parameters of the robot-cell, which include the robot DH parameters, non-geometric robot parameters, TCP, and the location of the fixture/part. The robot programs, created in a simulation software (Delcam), are then compensated utilizing the identified Absolute Accuracy parameters to account for the differences between the simulation robot-cell and the actual robot-cell. The compensated trimming robot positions meet the accuracy requirements of the helicopter panels.
 

 

 
 
 
 
Home
Products
Applications
Case Studies
Services
About Us
Contact
Automated In-Line Gauging About Us Applications Products About DynaCal DynaFlex CompuGauge roPOD AccuBeam DynaGuide Robot Guidance for Part-to-Part Variation Absolute Accuracy Robot Calibration Off-line Programming with No Touchup Robot Performance Analysis Contact Us {Copyright (C) 2023 Dynalog, Inc. All Rights Reserved} RIA Website Dynalog FaceBook Duplicate Robot Programs with No Touchup Maintain your Robot's Accuracy throughout Production Minimize Robot Downtime Accurate Cutting, Sealing, Welding with your Robot Adaptive Robot Control for Ultimate Accuracy Targeted Robot Communication Solutions Turn your Robot into Precision Machining Equipment
Clients
Careers
News
Other Links
About Us
Testimonials
Partners
Engelberger Award