AccuBeam: Robot Temperature Compensation & TCP/Robot Mastering Recovery System

Manufacturers today rely more and more on industrial robots for efficiency and quality. Robots used for welding, cutting, material handling, dispensing, and assembly must operate at very high levels of reliability and repeatability/accuracy to meet the demands of modern manufacturing. This means that any environmental changes or mechanical failure of the robot system - whether the robot itself or any of its peripherals - can result in many hours of lost production or can generate large amounts of scrap parts.

The AccuBeamTM (also known as AutoCalTM Series 2) system offers an inline robot calibration solution designed to quickly and automatically guarantee the performance of robotic equipment.  Adaptable to a wide variety of robotic applications and compatible with most robot types, the AutoCal Series 2 system can detect drift or sudden changes to the robot structure itself (including joint offsets) as well as its  Tool Center Point (TCP), and then automatically correct for those changes without any operator intervention.  This means no "guessing" of what went wrong; no valuable time wasted re-teaching robot programs, and no loss of production quality!

The AutoCal Series 2 System - Maximum Quality and Uptime at a Minimum Cost

     Automatic correction of robot temperature variations

     Full re-calibration of a "bent" tool (TCPx,y ,z and orientation)

     Fast recovery after a robot crash or motor replacement (joint offset re-mastering)

     Constant automatic monitoring of the robot's performance

     All that, while controlling quality and drastically minimizing any production downtime!

 

The AutoCal Series 2 System - Dynalog's State-of-the-Art Calibration Technology

Dynalog is the world leader in robot cell calibration technology. Its mainstream product - the DynaCal system - is used for off-line robot cell calibration, and has been accepted by many major robot manufacturers and end-users as the most accurate and technically advanced robot calibration process available.

The AutoCal Series 2 system incorporates the proven calibration technology of the DynaCal product into an in-line, fully automated system designed specifically for process monitoring, repeatability control, and recovery purposes.

 

The AutoCal Series 2 System - How it works

The AutoCal Series 2 System comes in different forms, depending on the particular robot controller and its level of integration (contact Dynalog for more information). However, a typical installation consists of (1) the  AutoCal software, (2) twin beam lasers, and (3) a rugged industrial sensor.  The  AutoCal Series 2 System relies on simple and automatic measurements: no special artifact or interface required! Between production cycles, the robot automatically executes - in a matter of seconds - a "Quick-Check" measurement routine to assess overall system performance and to detect any drift or crash of the robot or TCP. Any changes to the robot structure or TCP can then be automatically corrected through the  AutoCal Series 2 System's compensation process. Finally, the AutoCal system confirms the accuracy of the corrected robot and its TCP, to ensure consistent quality and process control.

 

AccuBeam System
Home
Products
Applications
Case Studies
Services
About Us
Contact
<<Products
dynalogmainsite001010.jpg
Recipient of the
Joseph F. Engelberger
Award for Technology
Related Topics:
>Applications>Maintain your Robot's Accuracy throughout Production
>Applications>Minimize Robot Downtime
Automated In-Line Gauging About Us Applications Products About DynaCal DynaFlex CompuGauge AutoCal AccuBeam DynaGuide Robot Guidance for Part-to-Part Variation Absolute Accuracy Robot Calibration Off-line Programming with No Touchup Robot Performance Analysis Contact Us {Copyright (C) 2017 Dynalog, Inc. All Rights Reserved} dynalogmainsite001003.jpg dynalogmainsite001002.jpg Duplicate Robot Programs with No Touchup Maintain your Robot's Accuracy throughout Production Minimize Robot Downtime Accurate Cutting, Sealing, Welding with your Robot Adaptive Robot Control for Ultimate Accuracy Targeted Robot Communication Solutions Turn your Robot into Precision Machining Equipment